Safety instructions for the use of mold test chambers

The mold test box is used to assess the damp heat test and aging test of various electrical appliances, instruments, materials, parts, and equipment under different temperature and humidity conditions. It is mainly suitable for aerospace products, materials, electronic products, and various electronic vital parts. In the hot and humid environment, inspect its various performance indicators.

　　The mold test chamber is a test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. It is used to test and determine the electrical and electronic vitality parts in the humid and hot environment to inspect their various performance indicators.

　　 Mold test box is a new generation product with simultaneous high temperature and high humidity function. The temperature and humidity are digitally displayed, and the instrument adopts an intelligent instrument with PID function. The humidity meter uses a wet bulb as the measuring sensor, and only needs to be filled with distilled water regularly, which is extremely convenient to use and maintain. The advanced electric heating humidification device guarantees the widest range of dry humidity requirements, and has the automatic control function of water cut. The inner tank is made of stainless steel, with four-corner arcs, and the bottom is stretched and formed at one time. The outer shell is in accordance with European plastic spraying process standards.

　　Mold test chamber safety instructions

　　1) Before using the instrument, you must carefully read all instructions and instrument instructions.

　　 2) The rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine, and have good grounding measures.

　　3) The use environment of the instrument should be in a well-ventilated room

4) Opening the door of the test box during the test will cause fluctuations in temperature and humidity in the box; during the test, if the door is opened many times or the door is left open for a long time or the test sample emits moisture, it may cause the heat exchanger of the refrigeration system Not working properly due to freezing

　　5) The mold test box is used for artificially accelerating the propagation of mold, and assessing the anti-mildew ability and degree of mildew of electrical and electronic products.

　　6) The mold test box body is formed by CNC machine tools, with beautiful appearance and non-reactional handle, which is easy to operate. The inner bladder of the box adopts imported stainless steel mirror panel, and the outer bladder of the box is sprayed with A3 steel plate, which increases the appearance texture and cleanliness. The water replenishment tank is placed in the lower right part of the control box and has automatic protection against water shortage, which is more convenient for the operator to replenish water.

The large observation window is equipped with an illuminating lamp to keep the inside of the box bright, and using the built-in tempered glass in the heating body, the situation inside the box can be clearly observed at any time. The humidification system pipeline is separated from the control circuit board, which can avoid failures due to water leakage in the humidification pipeline and improve safety. The piping circuit system of the waterway system adopts door opening, which is convenient for maintenance and overhaul. The box body is insulated with ultra-fine fiber insulation cotton, which can avoid unnecessary energy loss.

　　7) The mold test chamber is suitable for aerospace products, materials, electronic products, and various electronic vital parts to test their performance indicators in a humid and hot environment.

UV Carbon Arc weather Meter
UV Aging Test Chamber
Ozone test chamber